During the installation of the manipulator, due to the incorrect operation of workers, the manipulator will often have some faults of one kind or another. Next, engineers from Topstar will share the ten basic principles of the manipulator and injection molding machine installation based on the past experience.

At present, traditional manufacturing enterprises are upgrading to industrial automation and industrial robots on a large scale, and the degree of automation in all walks of life is getting higher and higher.Modern processing workshops are generally equipped with robots to improve productivity and perform tasks that are difficult to accomplish manually or that are dangerous.So is the manipulator safe?

In fact, during the installation of the manipulator, due to the incorrect operation of the workers, the manipulator will often have some faults of one kind or another. Next, based on the past experience, Engineers of Topstar will share ten basic principles of the manipulator and injection molding machine installation:

1, in two adjacent injection molding machine manipulator installation direction should be clear.

2. All actions and movements do not interfere with the switch of the safety door of the injection molding machine.

3, manipulator of all linear, rotation and other actions can be set on the spot, and can be set in a certain range of error, once the error of the set value, it will timely alarm and stop the action, and display its fault information on the touch screen.

4, injection molding machine or manipulator failure, injection molding machine and manipulator will be interlocked.That is, when the manipulator fails, the injection molding machine will stop operation;Also in the injection molding machine failure, manipulator will stop action.

5. The arm has anti-collision function: in case of misoperation, the program is equipped with automatic anti-collision function, which can automatically judge and stop the action according to the motor torque, so as to minimize the loss.

6, the manipulator and the action of the injection molding machine is consistent, that is, it will not produce collider nor interfere with the action of the injection molding machine, nor will the action of the manipulator lead to the excessive extension of the production cycle of the injection molding machine.

7. In case of shutdown of injection molding machine (fault shutdown, normal shutdown, mold replacement, equipment maintenance, etc.), the manipulator can be manually placed in a safe position or other necessary positions;Does not interfere with mold replacement and equipment maintenance operations.

8, manipulator failure (such as not in place, the product is not taken out, the product dropped, etc.) will immediately alarm and stop on the touch screen to show its fault, easy to quickly troubleshoot.

9, some products need the manipulator to include the mold release agent spray system, spray mold release agent can be accurately sprayed to the cavity after the mold opening (nozzle Angle adjustable), and can adjust the dosage, can set the spraying frequency.

10, that is, all parameters and data Settings can be set and modified through the computer, and then down to the manipulator system to execute, can also be set directly on the mechanical hand parameters and data.