Name: Oblique arm type MANIPULATOR, model: X650 PRODUCT USAGE: can clip the product, also can clip the water outlet x series, this series is all models in the cheapest, the function most simple model, it is mainly suitable for injection molding machines up to 200T (injection molding machines larger than this tonnage rarely use this type, mainly because the machine structure and customer product factors are not suitable) , generally used for two-plate clamping nozzle (feed head) and suction simple products, three-plate mould clamp nozzle (material head) , automatic or semi-automatic products, such as the need to draw out multi-hole products are not suitable. If the distance between the head plate of the injection molding machine and the bottom of the crane is over 1400mm, the X650V single cut-off machine can be selected, which is cheap and economical. If the distance between the head plate of the injection molding machine and the bottom of the crane is between 1200-1400mm, the X650WV double cut-off machine must be selected, which is slightly more expensive than the single cut-off machine, the function is the same. Features: 1, the fuselage can be rotated to facilitate mold change; 2, the Jig can be rotated at 90 ° to facilitate smooth product placement; 3, the jig is equipped with a magnetic switch, which can detect whether the jig is clamped to the nozzle to protect the mold safely; 4, the arm structure adopts linear slide rail with aluminum extrusion beam, the lower end of the arm is provided with a drop-proof cylinder to prevent the accidental gas-out arm from falling down and to protect the machine platform and the mould, arm Up and down, before and after the stroke can be adjusted according to needs; 8, the palm-shaped Hand Controller, chinese-english interactive interface, the operator equipped with LED lights, can directly understand whether the signal output, convenient troubleshooting.