Dongguan Runpard Automation Technology Co., Ltd


Frame type pneumatic and AC Servo Motor Traverse cnc robot arm for injection molding machine

Keywords :

Robot / Injection moiding robot / Injection moiding automation

  • Hits : 27
  • Company : Dongguan Runpard Automation Technology Co., Ltd
  • Telephone : +86 13794982536
Contact Us

Product Details

Contact Us

Five Advantages Of Products

  • This machine is suitable for 50-600 tons of all types of horizontal injection molding machine
  • For taking out the finished products of two-plate Mould, three-plate mould or hot runner mould and water gap.
  • Pull and arm use aluminum alloy profile with high rigid wire gauge, low noise, small vibration, long service life.
  • The application of double speed mechanism makes the arm speed faster and take out time shorter
  • The drawing arm and the taking arm are made of high-strength aluminum profile with precise linear slide rail, which is light in weight, good in rigidity, low in friction and long in life

Product Details

Product name: cross - walk manipulator

Model: RA700 / RA900

Usage: Injection molding nozzle and suction product

Cross walk RA series

This series, also called mini horizontal walk, is mainly suitable for injection molding machines within 50-280T, economical and practical, the function is more powerful than X series, not only can clip the nozzle but also can suck the product, both suitable for two plate die can also be used for three plate die.In addition to considering the size of the template, the safety door and the height of the crane, the thickness of the product should also be paid attention to when installing the cross walk machine (in case it cannot be crossed out). Similarly, this arm is also divided into single and double sections, which can only be recommended according to the calculation of the above dimensions.In addition, in the past, this horizontal drive mode has air pressure, frequency conversion motor, servo motor and other three, because the first two in the function or positioning accuracy is poor, has been abandoned by the market, and in recent years, servo motor and reducer technology is more and more mature, the price is more and more cheap, sideways servo has become the market common model.

Features: 1. Transverse double-arm manipulator is suitable for two or three plate dies, which can not only pinch the nozzle but also take the product. It is more suitable for multi-hole products of one die, with functions of suction, holding and clamping.2. Transverse servo drive, accurate positioning, fast speed, high precision, and transverse multi-stop placement of materials;3. The fixture is equipped with magnetic switch, which can detect whether it is clamped to the water mouth and protect the mold safely;4. Anti-falling cylinder is installed at the lower end of the arm to prevent the arm from falling down accidentally and protect the machine and mold;5. The upper and lower, front and rear stroke of the arm can be adjusted according to needs;6. The handheld controller has a Chinese-English conversational operation interface. The operator is equipped with LED lights, which can visually understand whether the signal is output and facilitate troubleshooting.

Dongguan Runpard Automation Technology Co., Ltd

Contact Person: Liu jian

Department: Marketing

Post: general manager

Telephone: +86 13794982536

Landline: +86 0769-81179626

Company Address: 2 shaling industrial West Road, Xiakou village, Dongcheng Street, Dongguan City

Factory Address: 2 shaling industrial West Road, Xiakou village, Dongcheng Street, Dongguan City


Previous: Industrial Robot Oblique arm mani...

Next: Multi-axis servo-manipulator for ...

Inquiry :