RA series, the series also known as mini-walking, mainly suitable for 50-280T less than the EJECTOR, economical, more powerful function than x series, not only can clamp nozzle and absorb products, both suitable for two-plate mold can also be used for three-plate mold. In addition to considering the size of the template, the safety door and the height of the crane, the thickness of the product (in case it can not cross out) should also be taken into account, in addition, in the past, there were three types of horizontal driving mode, such as air pressure, frequency conversion motor and Servo Motor. Due to the difference in function or positioning accuracy between the first two types, at present has been abandoned by the market, coupled with servo motor and reducer technology in recent years more and more mature, cheaper and cheaper, horizontal Servo has become a common model of the market. Features: 1, the transverse double-arm manipulator is suitable for two or three plates, it can take the products as well as the water inlet, and it is more suitable for the multi-hole products with the functions of suction, holding, clamping, etc. . 2, the transverse servo drive, positioning accuracy, fast, high precision, the clamp is equipped with a magnetic switch, which can detect whether the clamp is clamped to the water outlet, thus protecting the die safely. 4, the lower end of the arm is provided with a drop-proof cylinder to prevent the Unintentional gas-off arm from falling down, protecting the machine and the die. 5, arm Up and down, before and after the stroke can be adjusted according to needs; 6, the palm-shaped Hand Controller, chinese-english interactive interface, the operator equipped with LED lights, can directly understand whether the signal output, convenient troubleshooting.