Dongguan Runpard Automation Technology Co., Ltd

News

Note before installation of special manipulator for injection molding machine
Release time: 2020-08-05 17:10:37  Hits: 15

With the popularization of mechanization, when the manipulator has been working for a long time, the internal parts of the manipulator will be worn due to working, and due to working for a long time, the circuit chip and each component will produce heat consumption, easy to burn out the circuit board.Therefore, for the injection molding machine special manipulator installation and maintenance have a very high requirement.In order to more efficient work efficiency before the use of special manipulator injection molding machine should be clear about the following installation precautions:

1, in two adjacent injection molding machine manipulator installation direction should be clear.

2. All actions and movements do not interfere with the switch of the safety door of the injection molding machine.

3, manipulator of all linear, rotation and other actions can be set on the spot, and can be set in a certain range of error, once the error of the set value, it will timely alarm and stop the action, and display its fault information on the touch screen.

4, injection molding machine or manipulator failure, injection molding machine and manipulator will be interlocked.That is, when the manipulator fails, the injection molding machine will stop operation;Also in the injection molding machine failure, manipulator will stop action.

5. The arm has anti-collision function: in case of misoperation, the program is equipped with automatic anti-collision function, which can automatically judge and stop the action according to the motor torque, so as to minimize the loss.

6, the manipulator and the action of the injection molding machine is consistent, that is, it will not produce collider nor interfere with the action of the injection molding machine, nor will the action of the manipulator lead to the excessive extension of the production cycle of the injection molding machine.

7. In case of shutdown of injection molding machine (fault shutdown, normal shutdown, mold replacement, equipment maintenance, etc.), the manipulator can be manually placed in a safe position or other necessary positions;Does not interfere with mold replacement and equipment maintenance operations.

8, manipulator failure (such as not in place, the product is not taken out, the product dropped, etc.) will immediately alarm and stop on the touch screen to show its fault, easy to quickly troubleshoot.

9, some products need the manipulator to include the mold release agent spray system, spray mold release agent can be accurately sprayed to the cavity after the mold opening (nozzle Angle adjustable), and can adjust the dosage, can set the spraying frequency.

10, that is, all parameters and data Settings can be set and modified through the computer, and then down to the manipulator system to execute, can also be set directly on the mechanical hand parameters and data

According to the above matters needing attention, reasonable installation and debugging can greatly improve the production efficiency of the factory.Manufacturers should take due care before installation.

Special manipulator for injection molding machine


Previous: 8 maintenance points of injection...

Next: Degree of accuracy of slanted arm...