With the rapid development of industry and intelligent application promotion, our traditional injection molding industry has also used the injection molding machine manipulator to replace manual work to greatly improve productivity and reduce production costs, stabilize and improve the quality of injection molding products, and prevent the loss caused by manual operation errors.So the role of manipulator of injection molding machine in injection production becomes more and more important.This also makes the injection molding machine manipulator from the previous more used for taking after more and more manipulator for loading, mixing, automatic loading and unloading die, recycling waste and other processes, and will be intelligent multi-direction development.So what are the current injection molding machine manipulator practical applications?The following by dongguan Ruibo automatic manipulator manufacturer according to the number of templates of the different injection molding machine manipulator application is briefly summarized as follows:
. The injection molding machine paired with the manipulator is the application of two plate molds:
1.1 Automatic stripping
A: Take out the feed head and separate the feed head (take out the feed head and make the finished product automatically fall off and separate the product and feed head).
B: Separate the products under different conditions (take out the feed head, absorb or hold the product, separate the product and feed head).
C: Suction or lift product separation product (make the material head fall off automatically and separate the product and material head).
1.2 Manual stripper
A: Take out the material head (the product and the material head are connected together, and then manually separate the product and the material head after being clamped by the injection molding manipulator).
B: Absorb or take the finished product (the product and the material head are connected together, and the product is absorbed or taken by the injection molding manipulator).
C: Pinch the material head, absorb or hold the product (the product and the material head have been separated when the injection molding machine ejects, after being clamped by the injection molding machine manipulator, the material head and the product can be placed separately at different places).
Ii. The injection molding machine paired with the manipulator is the application of three-plate mold:
2.1 The product can automatically fall off, and the material head cannot fall off automatically
A: Take out the feed head, the product automatically falls off, and separate the product and feed head (single-arm injection manipulator).
B: The product arm absorbs or holds the product, the feed head arm takes out the feed head, and USES the manipulator to separate the product and feed head (the dual-arm injection molding manipulator).
2.2 Neither product nor material head can fall off automatically
A: The product arm absorbs or picks up the product, and the feed head arm takes out the feed head.Use a manipulator to separate the product from the head (dual arm injection manipulator).
B: The feed head arm takes out the feed head, and the product arm sweeps the product to complete the automatic stripper mode, separating the product and the feed head.
Three, injection molding machine manipulator application notes:
The use of the injection molding machine manipulator, if the product has the reverse, need to be in the ejecting after the reverse does not affect the product directly clamping.Therefore, when developing the mold, it is necessary to consider whether the product is suitable to be clamped by manipulator.
Four, injection molding machine manipulator application summary
Due to the difference of the molding products, the application of automation is also extremely complicated, because it can replace the inefficient manual operation and ensure the quality of the molding products, so the application is more and more extensive.The injection molding machine is configured to take out the injection molding machine manipulator is widely used in the forming automation ZUI.
Above hope to be helpful to you! You are welcome to correct me